AHX24-SR-200 | Belimo | Damper ActuatorConfigurable, Damper Actuator, 101 lbf [450 N], Non fail safe, AC DC 24 V, DC 2 10 V, cable For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturers specifications. The actuator operates in response to a 2 to 10 VDC, or with the addition of a 500 ? resistor, a 4 to 20 mA control input from an electronic controller or positioner. A 2 to 10 VDC feedback signal is provided for

NTC10k3 (Precon)

Duct Sensor Humidity / Temperature active

or On/Off from an auxiliary contact on a fan motor contactor

The default parameters for 2 to 10 VDC applications of the …MFT actuator are assigned during manufacturing

flanged 4" pressure independente control valve with BTU Meter

LRB24-3 Actuator

For shafts up to 3/4” use K6-1 accessory

A feedback signal is provided for position indication or master-slave applications

05” in diameter by means of its standard universal clamp

Probe length 1" [25 mm]

NMQX24-MFT Damper Actuator

BACnet IP and Modbus TCP