Variac Transformer Max 2,000VA - for use with all PVC Bendits. Please order directly from Amazon.Use the Variac Transformer to regulate the current to the PVC Bendit. Doing this allows you to lower the current so as to limit the temperature of the PVC Bendit. Conversion for VA to Watts: 500 VA = 350 Watts = 1. 46 Amps 2,000 VA = 1400 Watts = 5. 83 Amps

Customers that have ordered this tool typically work with 20' lengths of schedule 40 PVC pipe however if you are bending shorter lenghts it is okay to let the PVC Bendit extend from either or both ends of the pipe

Keep the PVC uniformly warm using the BendStation while heating

We replaced the standard electrical box connector with a coupler that will fit inside most 1-1/4" ID pipe

PVC Bendit - Series B - 3' Length PVC Pipe Bender

PVC Schedule 40 1 1/2" has an OD of 1

This 10B has an outside diameter of slightly less than 1 1/4" so it will fit inside 1 1/2" inch and larger schedule 40 and schedule 80 PVC pipe

If you must bend 1/2" Schedule 40 PVC pipe and it will not fit inside the brands of 1/2" schedule 40 PVC pipe you have you can return it for a full refund including shipping

We also changed the insulation from coated fiberglass tubing to Carbonized Graphite  "PAN" which like the fiberglass will not ignite and can handle heat to 1

This tool may be used in bending PVC pipe which is 1

A Series Bendstation has an ID of 1 3/8"

around $60 to $100

PVC Bendit - 1