DPA Microphones BC4099 - Acoustic Bass Mounting Clip for 4099 MicrophoneClip to connect a DPA 4099 Instrument Microphone to an acoustic upright bass. There are several excellent placement possibilities on the instrument. The microphone and its mounting system are both designed and optimized for the double bass. This ensures that the best mounting and audio reinforcement is achieved when performing live. The mic attaches to the E and G string below the bridge. This ensures mic placement in the sweet spot between the bridge

and schools

The -TPS6A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C

a wide frequency range and a fine resolution of transients

Gold Speaker Cable is configured for amplifier to speaker cabinet with 1/4" plug

The SG6P-3 is a 19" (3U) steel rackmount panel with six punched openings to front-load up to six standard wallplate devices that install with two screws

as well as broadcastand recording studios

Following the A-D conversion at each input

Ethernet networking provides streamlined setup across multiple receivers

The TX-TPSA1A may be powered from any of the RJ45 jacks

XLR and 1/4" line outputs

Unparalleled Audio Performance

or other personnel who need to cue on-air talent