Tapping chucks for synchronisation 25 - M4-M27 | ER 32Application: For machining centres with synchronous spindle. Note: Synchro tapping chucks compensate synchronisation errors. Minimal length compensation on compression and expansion balances very small pitch differences between synchro spindle and tap, which can cause high frictional forces on the thread flanks. A possible increase of axial force during the tapping process is reduced to a minimum. Suitable for internal coolant. Coolant pressure up to

bei Ø 6 – Ø 32 mm = h233

01mm to the centre axis

For the storage of collet chuck

With mechanical booster

Positionier- und Halte-Pin

Dial Graduation: 1°

- Dimensions Ø55x53 mm

Angle reading and adjustment using a vernier

LSCX = Clamping depth

Clamping positions: horizontal and vertical

Wherever reduced interference contours are required

- in case/box